1. What if the shower hose leaks:
If the reason for the water leakage of the shower hose is due to improper installation, deformation of the rubber ring, uneven or too thin outlet pipe joint, mismatch between the hose and the shower, select the appropriate hose and shower according to the specifications, replace the rubber ring and reinstall it. If the hose is broken, it will also lead to water leakage. At this time, just replace a new hose.

2. Method of replacing shower hose:
The sprinkler hose interfaces are the same. There are four sub interfaces. If water leakage is the problem of gaskets, plumbing hardware stores generally have gaskets, which are good and durable, and the quality of rubber is poor. To replace the hose, first replace the old sprinkler hose, screw the sprinkler hose down from the sprinkler and both ends of the water faucet by hand, and then replace the new sprinkler hose with one end screwed at the sprinkler, The other end is screwed on the faucet and then screwed on. The method of replacing the hose is very simple. You can learn it as soon as you learn.

3. Precautions for sprinkler hose maintenance:
Pay attention to the maintenance of the shower hose. Most of the water leakage of the shower hose is related to improper use. The leaking parts are often bent. These parts bear great force for a long time, so they are easy to be damaged. Therefore, when using the shower hose, try not to bend too much. Remember to hang it when not in use, so that the shower hose can maintain a natural stretch state, The service temperature of the shower hose shall not exceed 70 ℃. High temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower. Therefore, the shower shall be installed as far away from the electric heat source such as Yuba as possible. The shower shall not be installed directly below Yuba, and the distance shall be more than 60cm.